Heavy duty resin flooring is the toughest group of systems we install. These are trowel-finished, aggregate filled floors laid at 6mm to 9mm, and they are effectively impervious throughout their thickness, so a deep scratch or gouge does not open a path for chemicals into the concrete. They are specified as heavy duty industrial flooring for very heavy duty use, with very good resistance to chemical attack and low slip potential in both wet and dry conditions.
What heavy duty industrial flooring is designed for
A thin coating protects the surface of a slab. A heavy duty trowelled floor replaces the wearing surface altogether. At 6-9mm, with a dense aggregate filler bound in resin, it spreads the load from wheels and dropped objects and absorbs impact that would chip or crack a thinner system. The textured, speckled matt finish gives grip without relying on a separate anti-slip coat.
Where heavy duty resin flooring is used
- engineering and fabrication shops where steel components are dropped or dragged
- vehicle workshops with oils, fuels, jacks and stands
- dock entrances and roller shutter doors with forklifts running in from outside
- process areas with aggressive chemicals, hot spills or wet cleaning
- floors that need building up to meet finished floor levels
See our automotive and engineering resin flooring page for more on workshops and production plants.
When a lighter system makes more sense
Heavy duty flooring is a significant investment, and not every area needs it. Where loads are medium to heavy, a 4mm resin screed is usually sufficient. Where a smooth, gloss or easy-wipe finish is a priority, a heavy duty flowable system gives strength without texture. Storage areas with light traffic are better served by a high build coating.
System specification
| Feature | Description |
|---|---|
| Application | 3-part, trowel finished filled system providing a textured finish |
| Intended use | Very heavy-duty use |
| Thickness |
6mm-9mm |
| Chemicals | Very good chemical attack properties |
| Slip resistance | Low slip potential in both wet and dry conditions |
| Anticipated Life | VHD 10-12 Years |
| Appearance | Textured matt finish / speckled |
| Static | Static controlled versions available |
| Cleanability | Excellent cleanability |
Installing a 6-9mm trowelled floor
- Site survey: we measure levels, check the slab and identify contamination, pits, ducts and thresholds.
- Heavy preparation: old finishes and contaminated concrete are removed by grinding or shot blasting.
- Making good: filled pits, holes and level differences are built up with suitable repair mortars, and strength tested where needed.
- Anchor chases: cut at edges, doors and terminations so the floor is locked into the slab.
- Primer: applied to suit the substrate.
- Trowelled layer: mixed and hand trowelled to the specified thickness.
- Finish: sealed where specified, with extra aggregate blinded into high-risk areas.
Heavy duty floors in practice
A specialist Ducati dealer in Stoke wanted a high gloss workshop floor, but oil, grime and daily impact meant a fit for purpose system was needed instead. A former inspection pit had been covered with lintels and filled with repair mortar; after strength testing it was judged suitable to take the floor. Floor levels at the roller shutter and fire doors were raised with repair mortars, and a 9mm polyurethane screed was laid over the 60m2 workshop, bringing the floor to the level it needed to be (Stoke workshop case study).
For an oil manufacturer and distributor in Wolverhampton, the heavily trafficked goods out area was finished with 6mm polyurethane screed, with a heavier 1-2mm aggregate blinded into the roller shutter entrance for forklift grip in the wet (Wolverhampton case study).
Finish and anti-static options
The standard finish is a textured matt or speckled surface in a choice of colours. Despite the texture, cleanability is excellent. Static controlled versions are available where electronics or sensitive equipment are involved.
Common questions
What is the toughest resin floor?
Of the systems we install, a 6-9mm trowelled heavy duty floor is intended for the most demanding, very heavy duty use.
How long does heavy duty resin flooring last?
Our specification gives an anticipated life of 10-12 years in very heavy duty use.
Can heavy duty flooring raise floor levels?
Thicker systems, combined with repair mortars, can bring low areas and thresholds up to the finished floor level needed.
Is a textured floor hard to clean?
Our heavy duty systems are rated for excellent cleanability, despite the textured surface.
Plan a heavy duty floor
Heavy duty systems are used where the hardest wear occurs in factory resin flooring and warehouse flooring projects. Call 0161 726 5095 or request a quote to arrange a survey.