International Timber (Scotland) 998m2 of high build coating including 38m2 of Walkways including 100mm yellow line marking
What the client wanted to achieve
As an approved contractor for this international timber importer we are now on our 7th project installing slip resistant coatings and walkways to meet the companies new health and safety roll out programme, the width of the walkways needed to be 1.2 metres in total edged with a 100mm wide safety yellow lines.
The Solution
With just 3 days to complete the works we first shot blasted the areas, 2 coats of a hard wearing epoxy coating was then installed in Mid grey incorporating a small aggregate to help with slip resistance, Following on from the epoxy coating installations we then installed green walkways at 1.2mm which included 100mm lines edged to the walkways in safety yellow, as with all of the projects with this group the manager of the facility was happy and the areas were put into production Monday morning as promised.
Common questions
How is slip resistance added to an epoxy floor coating?
Slip resistance can be built in by adding aggregate to the coating. On this 998m² timber importer site in Scotland, two coats of hard-wearing mid-grey epoxy were applied with a small aggregate to give a slip-resistant finish, after the areas had first been shot blasted to prepare the surface.
Can a large warehouse floor coating be completed within a few days?
Yes, with careful planning. This project in Scotland had to be completed within three days, and the team shot blasted the areas, applied the slip-resistant epoxy coating and installed the walkways in that window. The areas went into production the following Monday, as promised to the facility manager.
What colours are used for warehouse walkways and floor coatings?
Colours are chosen for contrast and clarity. On this site the main floor was coated in mid-grey epoxy, the 1.2-metre-wide pedestrian walkways were finished in green, and they were edged with 100mm safety yellow lines so the routes are easy to see across the floor.
Why do sites roll out floor coatings and walkways in phases?
Phasing lets a business introduce new health and safety measures without stopping the whole operation. This timber importer was rolling out new health and safety measures, and this was the seventh project for the client, covering slip-resistant coatings and walkways, with each area handed back into production on schedule.