Ducati bikes workshop | 9mm Polyurethane screed resin flooring installers Stoke | 60 m2
What the client wanted to achieve
We received a call from a specialist Ducati dealer who required a workshop floor that would give a suitable floor finish including slip resistance, chemical attack resistance, impact and general day to day abuse, at first the client wanted what he described as a high gloss, great looking floor to go with the brand he was selling and servicing, as we all know oil, grime and daily impact with resin flooring cant really be achieved so a “FIT FOR PURPOSE” solution had to be the way forward to achieve the ultimate goal, after a few conversations and with Contact Floorings experience we agreed a specification that was going to last the test of daily operations within this facility.
The solution
Once Contact Flooring and the client had agreed the correct system we had to overcome a few issues, firstly there was a inspection pit that had been covered with lintels and filled in with repair mortar which in fairness had been done very well, after strength tests this was deemed suitable to accept the floor finish, there were also finish floor level heights to overcome at roller shutter doors and fire doors which we did by building up the areas with suitable repair mortars.
After all of the above was completed we then installed a 9mm polyurethane screed to the area, this brought the floor level to where it needed to be and gave the client what will be a surface to work on for many years to come.
Common questions
Can a motorcycle workshop floor have a high-gloss resin finish?
It is not practical. This Ducati dealer in Stoke first asked for a high-gloss finish to match the brand, but oil, grime and daily impact make that unrealistic for a workshop resin floor, so a fit-for-purpose specification was agreed instead using a 9mm polyurethane screed.
Why use 9mm PU screed in a vehicle workshop?
A workshop floor needs slip resistance, chemical resistance, impact resistance and tolerance of everyday wear, which a polyurethane screed provides. In this 60m2 Ducati workshop, the 9mm screed also brought the floor up to the required level, giving a surface intended for many years of use.
Can resin flooring be laid over a filled inspection pit?
Yes, provided the infill is sound. In this workshop an old inspection pit had been covered with lintels and filled with repair mortar. Strength tests were carried out, and the infill was judged suitable to receive the 9mm polyurethane screed finish.
How were level differences at the workshop doors corrected?
Finished floor level differences at the roller shutter doors and fire doors were corrected by building up those areas with repair mortars. The 9mm polyurethane screed was then laid over the whole workshop, bringing the floor to the required level throughout.