Concrete floor repairs keep a working floor safe and usable without the cost and disruption of starting again. Damage to a concrete floor is almost inevitable in busy warehouses, factories and distribution centres: forklift and pallet truck traffic, hard wheels, racking impacts, temperature changes, improper use and general neglect all take their toll. Left alone, cracks spread, joint edges break away and chipped patches become potholes.
Contact Flooring is a UK resin flooring contractor with over 20 years of experience, working nationwide from our head office in Hyde, Greater Manchester, and our Midlands office. This page explains the options for repairing and renovating concrete and resin floors, and points you to the right service for the problem you have.
Our concrete floor repair services
Every concrete floor is different, so the repair has to suit the floor. Choose the service that best describes your situation:
- Warehouse floor repairs for distribution centres, storage buildings and production areas: cracks, spalling, potholes, failed joints and forklift or racking damage, planned around live operations.
- Concrete floor repair contractors for industrial and commercial slabs of any kind, using epoxy resin injection, concrete repair mortars and cut-and-patch repairs.
- Resin floor repairs where an existing epoxy or polyurethane floor has been chipped, worn through or lifted, using rigid or flexible repair mortars before the finish is restored.
- Concrete slab joint repair for broken arrises and failed expansion joints, rebuilt and filled with a flexible resin that absorbs movement and impact.
- Warehouse floor grinding to remove high spots, ridges and old coatings and leave a flatter, sound surface.
- Surface preparation by enclosed shot blasting, grinding or scabbling, with dust extraction, before any repair or new coating goes down.
Repair, resurface or replace?
The most useful question to answer early is how far the damage goes. The answer decides whether a targeted repair is enough or whether a wider renovation makes more sense.
Repair
A repair deals with specific defects in an otherwise sound slab: individual cracks, broken joint edges, impact damage, holes around racking legs or worn traffic routes. Damaged concrete is cut out or ground back, the area is cleaned and vacuumed, and the void is rebuilt with a suitable resin or cementitious repair mortar. Cracks can be filled using epoxy resin injection. It is the quickest, least disruptive option.
Resurface
When damage is widespread, or an old coating is failing across a large area, it is usually better to repair the slab and then apply a new resin system over the whole floor. Depending on the use, that could be a high build epoxy coating or a resin screed for heavier traffic and impact. Our 2021m2 Birmingham warehouse dilapidations project is a good example: the failed coating was removed, the substrate was repaired and levelled with resin repair mortars, and two epoxy coats were applied to return the floor to a hard-wearing, fit for purpose finish.
Replace
Replacing a slab is a structural job and is only needed when the concrete itself has failed, for example through serious settlement or a breakdown of the slab across large areas. In many buildings a survey shows the floor can be brought back into service with repairs and a new surface instead.
How a floor repair job runs
- Survey. We inspect the floor, identify the type and extent of the damage and look for the likely cause.
- Preparation. Damaged areas are cut out, rough surfaces are ground back and everything is vacuumed so the repair materials bond to clean, sound concrete.
- Repair. Repair mortars, epoxy resin and joint fillers are installed to suit the defect and the traffic the floor carries.
- Finish and handover. Once cured, repairs can be sanded flush, coated or line marked, and the area is handed back for use.
Work can be phased, zoned or carried out over a weekend to keep disruption down. Our Oxford car parts warehouse repair was completed over a weekend to meet an urgent health and safety requirement.
Floor repairs in your area
We carry out warehouse and industrial floor repairs across England, Scotland and Wales. See our local pages for more on how we work in your region:
- Warehouse floor repairs in Manchester
- Warehouse floor repairs in Birmingham
- Warehouse floor repairs in London
- Warehouse floor repairs in Leeds
- Warehouse floor repairs in Cardiff
- Warehouse floor repairs in Glasgow
- Warehouse floor repairs in Edinburgh
Common questions
Can a cracked concrete floor be repaired without replacing it?
Usually, yes. Most cracks in an industrial slab can be filled with epoxy resin or repaired with a mortar after the edges are cut back. Replacement is only needed when the slab itself has failed.
Can repairs be done while the building is in use?
In most cases. Areas are taped off and worked in sections, or the job is scheduled for a weekend or a shutdown, so that the rest of the site keeps operating.
Should I repair before applying a new coating?
Yes. A new coating will show every defect underneath it and can fail early over damaged concrete. Repairs and mechanical preparation come first.
Arrange a floor survey
The sooner damage is looked at, the more options you have. Call us on 0161 726 5095, request a quote or contact us to arrange a site survey.